Histories of UK potters and pottery manufacturers

Please consider my book


© Michael Perry 2011. Contact

Image courtesy of Lema Publishing Ltd, publishers of ‘Tableware International’ www.tablewareinternational.com

Last updated: 1st August 2011


Makers mark (backstamp)

Virtually all Doulton tableware has a black printed Royal Doulton ‘mark’ or ‘backstamp’ applied to the underside of the ware. The mark was varied from time to time and the table below includes the major marks that appear on tableware manufactured at Doulton’s Nile St, Burslem, factory. There are numerous special Doulton marks on series ware and other special lines.



Between 1882 and 1901 various Pinder, Bourne & Co. and Doulton marks appear on the earthenware and bone china (from c. 1884) produced at the Niles St factory. The most common Doulton mark is circular with the central four interlocking ‘D’ symbols that continued in later marks.


A similar device with a crown above, was used from 1886 to mark the appointment of Doulton as potters to  His Royal Highness the Prince of Wales (later King Edward VII, following the death of Queen Victoria in 1901.


The word ‘England’ may appear below both of these marks from  1891 to 1901


1901-1922 (also 1927-c. 1936)

In 1901, the company introduced a new Doulton mark with the lion, crown and ‘intersecting D motif’. The new mark and use of the name ‘Royal Doulton’ as opposed to ‘Doulton’ celebrate the grant of the Royal Warrant to Doulton by King Edward VII in 1901. This mark was used in various forms into the 1990s.

From 1901 to 1922 the standard mark appears with the words ‘Royal Doulton’ and ‘England’.


From 1922 or 1923 until the end (presumably) of 1927 tableware appears bearing a mark that lacks the traditional crown. The reason for the introduction and use of this new mark is not known although it may have been nothing more complex than the need for a smaller mark to fit smaller wares.

The mark appears not to have been used exclusively as there are examples of the earlier ‘standard’ Doulton mark that can be unambiguously dated to the years 1922 to 1927.

1928 - circa 1936

From 1928 the earlier ‘standard’ mark with lion, crown and ‘D’ motif was ‘reintroduced’. The mark, however, was supplemented by a date number related to the year of production. A prominent ‘1’ signifies 1928 and the numbering continue to ‘30’ in 1957.  The simple rule is that adding 1927 to the number give the year of production.

This resumed use of the ‘standard’ mark is believed to have continued until about 1936 and for the period from about 1930 to 1936 examples of both this mark and the following ‘Made in England’ mark can be found.



Circa 1930 - circa 1993(?)

In about 1930 a new form of the ‘standard’ mark was introduced bearing the words ‘Made in England ‘ above the Royal Doulton name and this mark was used until recent times. The date numbers referred to above may, or may not, accompany this mark.

Various forms of this mark were used over its 50-odd year life. Proportions may differ slightly and the words ‘Bone China’ and ‘Fine China’ may appear below the mark.


1993(?) to the present

A totally new Doulton mark of a lion’s head has been used on current-day Doulton tableware. Its date of introduction is uncertain, but it is likely the mark reflects the 1993 transition from Doulton as a Pearson Group company to the independently listed Royal Doulton plc.

©Michael Perry 2011